Hp Secure Encryption Manual do Utilizador descarregar pdf (Página 24)

Configuration 24

4. Under the section Create Key, complete the following:

o Key Name: Enter the preferred key name.

The name must consist only of US-ASCII letters, numbers, or the underscore or hyphen characters,

and must be between 8 and 64 characters. The minimum character length is required by the Smart

Array controller, not by the ESKM.

o Owner Username: Enter the name of the user account to be paired with the key. If creating the

Master Encryption Key, do not assign keys to the deployment user account.

o Algorithm: Select AES-256.

o Select the Exportable checkbox. Leave the remaining fields as the default values.

5. Click Create. You will receive a notification that the key was created successfully.

Placing a key in a group

A key must be assigned a group in order to enable access by HP iLO. To place a key in a group, do the

following:

1. Run a key query and locate the key created ("Running a key query" on page 24).

2. Assign the key to a group ("Assigning a key to a group" on page 26).

Running a key query

1. Log in to the HP ESKM 3.1 ("Logging in to the HP ESKM 3.1" on page 17).

2. Click the Security tab.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

Sem comentários

Hp Secure Encryption Manual do Utilizador Página 24