Hp Smart Storage Administrator Manual do Utilizador descarregar pdf (Página 88)

Operations 88

• 512—512 KB

• 1024—1024 KB (supported starting with Gen8 controllers)

The default strip size value depends on the action mode:

• In Configure action mode, the default value is determined by the RAID level that you specified earlier in

the script.

• In Reconfigure action mode, the default value for this option is the strip size that is already configured

for the logical drive. If you enter a value that is different from the existing strip size, HP SSA attempts to

migrate the logical drive to the strip size that you specify. (If you intend to migrate the logical drive, back

up all data before starting the migration procedure.)

Encryption support commands

The following commands have been added to HP SSA Scripting versions 1.60.0.0 and later to support data

encryption features introduced with select Gen8+ controllers.

Encryption controller category

AllowPlainText

This command allows future plaintext volumes to be created when encryption is enabled. Existing volumes

are not modified. To toggle this command, use Yes or No values.

AcceptEULA

The command Yes accepts the Encryption End User License Agreement. The EULA must be accepted before

Encryption can be enabled.

ControllerPassword

This command sets the boot time controller password. Enter the password as the value.

ControllerPasswordMode

This command sets the boot password mode, allowing it to be suspended or deleted.

This command has the following values:

• Remove

• Suspend

• Resume

Encryption

This command enables or disables controller encryption through the values Enable or Disable. Before

encryption can be enabled, the following values must be set:

• Crypto user password ("EncryptionCryptoPasswordSet" on page 89)

• Key management mode ("EncryptionKeyManager" on page 89)

• Initial Master Encryption Key ("EncryptionMasterKey" on page 89)

• EULA ("AcceptEULA" on page 88) (accepted)

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 126 127

Sem comentários

Hp Smart Storage Administrator Manual do Utilizador Página 88