Hp SmartStart-Software Manual do Utilizador descarregar pdf (Página 11)

Installation and configuration 11

10.

Select<Esc> twice and select Exit and Save Configurations.

11. Press <Esc> to exit the Device List, if prompted and then select F4 to exit; otherwise, just press F4 to

exit.

NFS install

Prior to beginning the NFS install, set up the NFS server and ensure that the OS distribution files to be

installed are present and are exported using NFS. Steps that are not documented here should be

considered irrelevant and do not affect the iSCSI installation steps.

Installing targets using NFS

1. Power on the server with the first OS installation CD in the CD-ROM drive.

2. At the boot: prompt type the following:

linux install=nfs://<nfs ip>://<path-to-OS-distro-dir>

3. Select the required language, keyboard, and NFS image install.

4. Select the appropriate network device from which to do the install and select OK.

5. Enter the NFS server name and Red Hat Enterprise Linux Server directory. This is the same name and

directory that was entered in step 2 above. After the Red Hat Enterprise Linux 5 GUI is displayed,

select Next.

6. Select Advanced storage configuration. Ensure that Add iSCSI target is selected and then select Add

drive.

7. In the Configure iSCSI Parameters dialog box enter the Target IP Address and iSCSI Initiator Name

and select Add Target. Please note that the iSCSI Initiator connects to the target and the target drive

appears as an available drive for the installation.

8. Follow the traditional installation procedure as prompted. The installation automatically sets up the

disk for iSCSI boot during post installation. After the disk is configured for iSCSI boot, the standard

OS installation screen appears and the system reboots.

9. On initial boot, enable booting to the iSCSI target drive by selecting Ctrl-S. In the MBA

Configuration Menu select the appropriate function key combination (varies based on configuration

see menu for your combination) to enter the iSCSI Cfg menu.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Comentários a estes Manuais

Sem comentários

Conceptronic C20-150 Ficha de datos (3 paginas)

Marca: Conceptronic | Categoria: HDD/SSD enclosures | Tamaño: 0.26 MB |

Tabla de contenidos

CHD2SUSB3 C20-150

Más productos y manuales para Hdd / ssd recintos Conceptronic

Modelos	Tipo de documento
C20-258	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Violet USB powered, 3 paginas
C05-210	Ficha de datos Conceptronic 3,5 inch USB hard disk box for SATA hard disk, 3 paginas
C05-500	Ficha de datos Conceptronic 2,5 / 3,5 inch hard disk docking station eSATA/USB, 3 paginas
CHD3SATA	Ficha de datos Conceptronic Serial ATA External Hard disk box 3.5 “., 1 paginas
C10-393	Ficha de datos Conceptronic Grab'n'GO 2.5” Hard Disk Box eSATA/USB 2.0, 3 paginas
C05-326	Ficha de datos Conceptronic USB SATA HDD 2.5" BLACK USB powered, 3 paginas
C10-135	Ficha de datos Conceptronic 3,5 inch USB/e-SATA hard disk box, 3 paginas
C05-106	Ficha de datos Conceptronic USB 2.0 & Firewire Harddisk Box 3.5", 1 paginas
C05-324	Ficha de datos Conceptronic 3,5 inch HardDiskBox DualBay, 3 paginas
C20-253	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Blue USB powered, 3 paginas
C05-209	Ficha de datos Conceptronic 2,5 inch USB hard disk box for SATA hard disk, 3 paginas
CHD3U	Ficha de datos Conceptronic USB 2.0 Hard Disk Box 3.5", 1 paginas

Hp SmartStart-Software Manual do Utilizador Página 11

Comentários a estes Manuais

Conceptronic C20-150 manuales

Conceptronic C20-150 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic

Hp SmartStart-Software Manual do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Software Hp SmartStart-Software

Conceptronic C20-150 manuales

Conceptronic C20-150 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic