HP PCIe Workload Accelerators for ProLiant Servers Manual de Instalação descarregar pdf (Página 19)

7 LED Codes

Table 2 LED Codes

Description

HHHL

Red LEDAmber LEDGreen LED

Indicates that power is off.OffOffOff

Indicates that power is on and the drive is busy

with an internal operation. Wait until the

OffGreen/amber flashing alternately (200ms)

operation completes. The drive state should

change to a solid green LED state.

Indicates that either an ATA command is being

processed or power is on, firmware is

OffOffOn

initialized, and there is no host activity. The

drive is operational in either state.

Indicates that PCIe/NAND host activity is in

process. The drive is busy, but operational.

OffOffFlashing (30ms)

Indicates an error code. Error codes are three

digits long and are displayed by blinking the

Flash error codeFlash error codeFlash error code

first digit, then the second, then the third with

pauses in between and a long pause before

repeating. The drive is not operational.

Firmware fatal error codes:

• 112: Failure during DRAM initialization

• 113: Not enough DRAM to run in the

configured mode

• 313: DRAM UECC error

• 441: Error during chip initialization

• 411: Incorrect drive parameters in the

firmware image

Indicates that the drive is backing up internal

data to NAND. The drive is busy, but

operational.

OffFlashing (30ms)Off

Indicates that the drive is in the safe or

“parked” mode. Internal data has been written

to NAND and the drive is safe to power down.

OffOnOff

Indicates that the drive requires a secure erase

or has encountered a critical error. The drive

is not operational.

OnOffOff

19

1 2 ... 14 15 16 17 18 19 20 21

Comentários a estes Manuais

Sem comentários