Hp 2000I G2-Modular-Smart-Array Manual do Utilizador descarregar pdf (Página 68)

68 Regulatory compliance and safety

• Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

• Place parts on a grounded surface before removing them from their containers.

• Avoid touching pins, leads, or circuitry.

• Always be properly grounded when touching a static-sensitive component or assembly (see “Grounding

methods” on page 68).

Grounding methods

There are several methods for grounding. Use one or more of the following methods when handling or

installing electrostatic-sensitive parts:

• Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist

straps are flexible straps with a minimum of 1 megohm (±10 percent) resistance in the ground cords. To

provide proper ground, wear the strap snug against the skin.

• Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet when

standing on conductive floors or dissipating floor mats.

• Use conductive field service tools.

• Use a portable field service kit with a folding static-dissipating work mat.

If you do not have any of the suggested equipment for proper grounding, have an HP authorized reseller

install the part.

NOTE: For more information on static electricity, or assistance with product installation, contact your HP

authorized reseller.

1 2 ... 63 64 65 66 67 68 69 70 71 72

Sem comentários

Hp 2000I G2-Modular-Smart-Array Manual do Utilizador Página 68