Hp SAN Manual do Utilizador descarregar pdf (Página 42)

Figure 28 Raw Data window

Determining the SMTP server IP address

To find the SMTP server IP address, complete the following steps:

1. Select Start > Run, and enter cmd in the box.

2. Click OK to open the MS-DOS command prompt.

3. Enter the nslookup <primary_domain_name> command, where

<primary_domain_name> is your domain name, and press Enter.

The primary DNS server address is displayed.

4. Enter the nslookup command, and press Enter to go to the shell prompt.

5. Enter the server <DNS_server_name> command, and press Enter.

6. Enter the <primary_domain_name>, where <primary_domain_name> is your domain

name, and press Enter.

7. Enter the set query=mx command, and press Enter.

8. Enter the <primary_domain_name>, and press Enter.

The detected SMTP server IP addresses are displayed, as shown in Figure 29 (page 42).

9. Select an appropriate SMTP server from the list.

10. Enter exit, and press Enter to exit from the shell prompt.

11. Enter exit, and press Enter to exit from the MS-DOS command prompt.

Figure 29 Determining SMTP server details

42 Using SAN Visibility

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 58 59

Sem comentários

Hp SAN Manual do Utilizador Página 42