Hp P2000 G3 MSA Array Systems Manual do Utilizador Página 55
- Página / 86
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
HP P2000 G3 iSCSI MSA System User Guide 55
Is the controller back panel OK LED off?
Is the controller back panel Fault/Service Required LED amber?
Are both disk drive module LEDs off (Online/Activity and Fault/UID)?
Is the disk drive module Fault/UID LED blinking amber?
Answer Possible reasons Actions
No System functioning properly. No action required.
Yes The controller module is not
powered on.
The controller module has
failed.
• Check that the controller module is fully inserted and
latched in place, and that the enclosure is powered
on.
• Check the event log for specific information regarding
the failure.
Answer Possible reasons Actions
No System functioning properly. No action required.
Yes
(blinking)
One of the following errors
occurred:
• Hardware-controlled
power-up error
• Cache flush error
• Cache self-refresh error
• Restart this controller from the other controller using
SMU or the CLI.
• Remove the controller and reinsert it.
• Contact an authorized service provider for assistance.
• Replace the controller.
Answer Possible reasons Actions
Yes • There is no power.
• The disk is offline.
• The disk is not configured.
• Check that the disk drive is fully inserted and latched in
place, and that the enclosure is powered on.
Answer Possible reasons Actions
No, but the
Online/Activity
LED is blinking.
The disk drive is rebuilding. No action required.
CAUTION: Do not remove a drive that
is rebuilding. Removing a drive might
terminate the current operation and
cause data loss.
Yes, and the
Online/Activity
LED is off.
The disk drive is offline. A predictive
failure alert may have been received
for this device.
• Check the event log for specific information
regarding the fault.
• Isolate the fault.
• Contact an authorized service provider for
assistance.
Yes, and the
Online/Activity
LED is blinking.
The disk drive is active, but a
predictive failure alert may have been
received for this device.
• Check the event log for specific information
regarding the fault.
• Isolate the fault.
• Contact an authorized service provider for
assistance.
- HP P2000 G3 iSCSI MSA System 1
- User Guide 1
- Acknowledgements 2
- Contents 3
- 4Contents 4
- 6Contents 6
- 8Figures 8
- 10 Tables 10
- About this guide 11
- Monospace, italic font 12
- Subscription service 13
- Rack stability 13
- HP technical support 13
- Customer self repair 13
- Product warranties 13
- HP websites 14
- Documentation feedback 14
- 1Overview 15
- 16 Overview 16
- 2Components 17
- Disk drive bay numbers 18
- Rear panel components 19
- D2700 6Gb drive enclosure 20
- MSA70 3Gb drive enclosure 20
- Transportable CompactFlash 21
- Super-capacitor pack 22
- 3Installing the enclosures 23
- 24 Installing the enclosures 24
- P2000 G3 Controller Enclosure 25
- Testing enclosure connections 33
- Powering on/powering off 33
- Power Cords 34
- DC model 35
- Power cycle 35
- 36 Installing the enclosures 36
- 4 Connecting hosts 37
- 1Gb iSCSI host ports 38
- 10GbE iSCSI host ports 38
- One server/one HBA/dual path 39
- Dual controller configuration 40
- Updating firmware 45
- 46 Connecting hosts 46
- Device description 47
- Obtaining IP values 47
- Connect USB cable to CLI 49
- IP-address 50
- 6 Basic operation 51
- 52 Basic operation 52
- 7Troubleshooting 53
- Diagnostic steps 54
- 56 Troubleshooting 56
- Transporting Cache 58
- 60 Troubleshooting 60
- Cabling for replication 61
- 62 Troubleshooting 62
- Can you replicate a volume? 63
- Can you view remote systems? 64
- Sensor locations 65
- Power supply sensors 65
- Cooling fan sensors 65
- Temperature sensors 65
- A LED descriptions 67
- Disk drive LEDs 68
- Rear panel LEDs 69
- LED Description Definition 70
- P2000 G3 1Gb iSCSI MSA 71
- Power supply LEDs 73
- Safety requirements 75
- Management host requirements 76
- Physical requirements 77
- Environmental requirements 78
- Electrical requirements 78
- Power cord requirements 79
- C Electrostatic discharge 81
- 82 Electrostatic discharge 82
- 84 Index 84
- 86 Index 86
Manuais e produtos relacionados com Armazenamento Hp P2000 G3 MSA Array Systems
(93 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.017 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais