Hp SB40c-Storage-Blade Manual do Utilizador Página 1

HP StorageWorks SB40c Storage Blade User Guide Part Number 433904-002 November 2006 (Second Edition)

Setup 10 Setup In this section Shipping carton contents...

Setup 11 Half-height device bay numbering Installation guidelines Observe the following guidelines when installing the SB40c: • An SB40c supports

Setup 12 • Install the coupler plate on the SB40c. • Install the SB40c in any device bay on the lower row of the enclosure (9 through 16). • If th

Setup 13 3. Remove the enclosure connector cover. 4. Identify the partner server blade to be installed with the SB40c: o To install the SB40c with

Setup 14 5. Prepare the storage blade for installation. 6. Install the storage blade: o Partnered with a half-height server blade

Setup 15 o Partnered with a full-height server blade 7. Install a server blade. See the documentation that ships with the server blade. 8. Config

Hardware options installation 16 Hardware options installation In this section Hard drive options ...

Hardware options installation 17 2. Prepare the hard drive. 3. Install the hard drive. 4. Install the SB40c in the enclosure ("Installing a

Configuration and utilities 18 Configuration and utilities In this section Configuration tools...

Configuration and utilities 19 For more information regarding the default configurations that ORCA uses, refer to the HP ROM-Based Setup Utility Use

© Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

Configuration and utilities 20 Keeping the system current Change control and proactive notification HP offers Change Control and Proactive Notificat

Troubleshooting 21 Troubleshooting In this section When the storage blade does not power up...

Troubleshooting 22 Answer Possible reasons Possible solutions • Insufficient power is available to operate the SB40c. • Remove any unused server

Troubleshooting 23 Compromised fault tolerance If more hard drives fail than the fault-tolerance method allows, fault tolerance is compromised, and t

Troubleshooting 24 • Do not remove a second drive from an array until the first failed or missing drive has been replaced and the rebuild process is

Troubleshooting 25 Failure of another drive during rebuild If a non-correctable read error occurs on another physical drive in the array during the r

Troubleshooting 26 to indicate a successful connection. The online LED flashes, indicating that the SB40c recognized the drive replacement and began

Regulatory compliance notices 27 Regulatory compliance notices In this section European Union regulatory notice ...

Regulatory compliance notices 28 Korean class A notice

Electrostatic discharge 29 Electrostatic discharge In this section Preventing electrostatic discharge...

Contents 3 Contents Component identification...

Specifications 30 Specifications In this section Environmental specifications ...

Technical support 31 Technical support In this section Before you contact HP...

Technical support 32 • Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If, howev

Technical support 33 Riparazione da parte del cliente Per abbreviare i tempi di riparazione e garantire una maggiore flessibilità nella sostituzione

Technical support 34 muss. Wenn es erforderlich ist, das defekte Teil an HP zurückzuschicken, müssen Sie dies innerhalb eines vorgegebenen Zeitraums

Technical support 35 dat onderdeel rechtstreeks naar u, zodat u het defecte onderdeel daarmee kunt vervangen. Er zijn twee categorieën CSR-onderdele

Technical support 36 reparo feito pelo cliente, a HP paga todas as despesas de transporte e de devolução da peça e determina a transportadora/serviç

Technical support 37

Technical support 38

Acronyms and abbreviations 39 Acronyms and abbreviations ACU Array Configuration Utility ADU Array Diagnostics Utility CPQONLIN NetWare Online Arr

Contents 4 Recovering from compromised fault tolerance... 23 Factors

Acronyms and abbreviations 40 SIM Systems Insight Manager UID unit identification

Index 41 A ADU (Array Diagnostic Utility) 19 B BSMI notice 27 C Care Pack 20 Change Control 20 component identification 5 configuration of

Index 42 specifications 30 static electricity 29 support 19, 31 T technical support 31 telephone numbers 31 troubleshooting 21 U UID LEDs

Component identification 5 Component identification In this section Front panel LEDs ...

Component identification 6 Front panel components Item Description 1 Serial pull tab 2 Storage blade handle SAS and SATA device numbers

Component identification 7 SAS and SATA hard drive LEDs Item Description 1 Fault/UID LED (amber/blue) 2 Online LED (green) SAS and SATA h

Component identification 8 Online/activity LED (green) Fault/UID LED (amber/blue) Interpretation Off Steadily amber A critical fault condition has b

Operations 9 Operations In this section Power up.........................