Hp StorageWorks 2000fc G2 Modular Smart Array Manual do Utilizador descarregar pdf (Página 25)

HP 2312fc and 2324fc Modular Smart Array user guide 25

1. From your network administrator obtain an IP address, subnet mask, and gateway address for

controller A and controller B.

2. Use the provided micro-DB9 serial cable to connect controller A to a serial port on a host computer.

Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a DB9-to-DB25 adapter

(not included) for connecting the serial cable to a DB25 serial port on the host computer.

3. Start and configure a terminal emulator, such as HyperTerminal or VT-100, using the display settings in

Table 3 and the connection settings in Table 4.

4. In the terminal emulator, connect to controller A.

5. Press Enter to display the CLI prompt (#).

Table 3 Terminal emulator display settings

Parameter Value

Terminal emulation mode VT-100 or ANSI (for color support)

Font Terminal

Translations None

Columns 80

Table 4 Terminal emulator connection settings

Parameter Value

Connector COM1 (typically)

Baud rate 115,200

Data bits 8

Parity None

Stop bits 1

Flow control None

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Sem comentários

Hp StorageWorks 2000fc G2 Modular Smart Array Manual do Utilizador Página 25