Hp StorageWorks XP10000 Disk Array Manual do Utilizador descarregar pdf (Página 123)

• Secret: Secret (that is, a password used in CHAP authentication) between 12 to 32

characters. You can use alphanumeric characters.

• Re-enter Secret: Specify the secret, again, for conﬁrmation.

5. Click OK.

6. Click Apply.Aconﬁrmation message appears.

7. Click OK. Settings are applied to the array.

Clearing a Fibre Channel switch's user information

1. Start LUN Man

ager, and display the Authentication pane (Figure 30).

2. In the Port t

ree, double-click the Subsystem folder. If the array contains Fibre Channel adapters, the

Fibre folder appears below the Subsystem folder.

3. In the Port tree, double-click the Fibre folder. Information about the Fibre Channel switch appears in

the FC Switc

h Information list.

4. Right-click any point in the FC Switch Information list, and select ClearUserinformation.TheClear

Authentication Information pane appears.

Figure

70 Clear Authentication Information pane

5. Click OK.

6. Click Apply.Aconﬁrmation message appears.

7. Click OK. Settings are applied to the array.

Specifying a Fibre Channel switch's authentication mode

1. Start LUN Manager, and display the Authentication pane (Figure 30).

2. In the Port tree, double-click the Subsystem folder. If the array contains Fibre Channel adapters, the

Fibre folder appears below the Subsystem folder.

3. In the Port tree, double-click the Fibre folder. Information about the Fibre Channel switch appears in

the FC Switch Information list.

4. Right-click any point in the FC Switch Information list, and select Authentication

unidirectional->bi-directional.

5. Click Apply.Aconﬁrmation message appears.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

123

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 219 220

Sem comentários

Hp StorageWorks XP10000 Disk Array Manual do Utilizador Página 123