Hp StoreFabric Converged Network Adapters Manual do Utilizador

HP FCoE Configuration for Broadcom-Based Adapters User Guide Abstract This document is for the person who installs, administers, and troubleshoots

Configuration 10 lldp : { eth5 : { tlvid00000001 : { info = "04BC305B017B73"; }; tlvid00000002 : { info = "03BC305B017B73"; }; }

Configuration 11 Source MAC Settable: false VLAN Range Settable: false 3. Enable the FCoE interface: # esxcli fcoe nic discover -n vmnicX where X i

Configuration 12 Installing BACS For more information about BACS, see the Broadcom BACS for HP FlexFabric and StoreFabric Adapters User Guide (http:

Troubleshooting 13 Troubleshooting Linux installation and configuration known issues The following issues are known for Linux installation and confi

Troubleshooting 14 Boot from SAN is not supported on ESXi 5.0.x for VMware Boot from SAN is not supported on ESXi 5.0.x for VMware. Multipath confi

Support and other resources 15 Support and other resources Before you contact HP Be sure to have the following information available before you call

Acronyms and abbreviations 16 Acronyms and abbreviations BACS Broadcom Advanced Control Suite BACSCLI Broadcom Advanced Control Suite command line

Acronyms and abbreviations 17 ID identification LLDPAD Link Layer Discovery Protocol Agent Daemon LUN logical unit number MAC Media Access Contro

Acronyms and abbreviations 18 YaST Yet another Setup Tool

Documentation feedback 19 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentat

© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warrantie

Index 20 B boot from SAN 4, 14 booting 4 booting problems 13, 14 C CCM menu 8 configuration 5 contact information 15 contacting HP 15

Contents 3 Contents Introduction ...

Introduction 4 Introduction Performing a local boot with an FCoE-enabled network adapter This guide details FCoE configuration of Broadcom-based, HP

Configuration 5 Configuration Configuration overview Install the software in the following order: 1. Set the storage personality (if required). 2.

Configuration 6 The CCM Device List shows every port of all Broadcom adapters in the system. 3. Select a port with the arrow keys, and then press

Configuration 7 The CCM Main Menu appears. 4. Select Device Hardware Configuration, and then press Enter. The Device Hardware Configuration Menu a

Configuration 8 5. Select the Storage Personality field with the arrow keys, press Enter or the space bar to toggle between options, and then select

Configuration 9 2. Double-click the Smart Component executable, and then click Install. The Smart Component automatically installs the drivers witho