Hp XP Array Manager Software Manual do Utilizador descarregar pdf (Página 58)

Figure 33 The Clear Authentication Information Dialog Box

Setting the

Switch Authentication Mode

To specify t

he authentication mode of a Fibre Channel switch:

1. Make sure that Remote Web Console is in Modify mode.

Start LUN M

anager and display the Authentication window (Figure 12 on page 29).

3. In the Port

tree, double-click the Subsystem folder.

If the storage system contains any Fibre Channel adapters, the Fibre folder appears below

the Subsystem folder.

4. In the Port tree, double-click the Fibre folder.

The infor

mation for the Fibre Channel switch appears in the FC Switch Information list.

5. Right-click any point in the FC Switch Information list and select Authentication

Mode:unidirectional->bi-directional from the pop-up menu.

6. Click the Apply button.

Amessage

appears and asks if you want to apply the setting to the storage system.

7. Click the OK button to close the message.

The setting is applied to the storage system.

To return the Fibre Channel setting, perform the same operation, but select the Authentication

Mode:bi

-directional->unidirectional menu in step 5.

Enabling or Disabling Switch Authentication

To enable Fibre Channel switches to authenticate hosts, you must enable the user authentication settings

of Fibre Channel switches. By default, the Fibre Channel switch authentication is disabled.

To enable a Fibre Channel switch to authenticate hosts:

1. Make sure that Remote Web Console is in Modify mode.

Start LUN Manager and display the Authentication window (Figure 12 on page 29).

3. In the Port tree, double-click the Subsystem folder.

If the storage system contains any Fibre Channel adapters, the Fibre folder appears below

the Subsystem folder.

4. In the Port tree, double-click the Fibre folder.

The information for the Fibre Channel switch appears in the FC Switch Information list.

5. Right-click any point in the FC Switch Information list and select Authentication :Disable->Enable

from the pop-up menu.

6. Click the Apply button in the Authentication window.

A message appears and asks if you want to apply the setting to the storage system.

Performing LUN Manager Operations

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 104 105

Sem comentários

Hp XP Array Manager Software Manual do Utilizador Página 58