Hp XP Performance Advisor Software Manual do Utilizador descarregar pdf (Página 13)

2 Installing XPWatch

This section describes installing and uninstalling XPWatch. It also describes the various components

of XPWatch.

Prerequisites

The following are the prerequisites to install XPWatch:

• The XP Performance Advisor host agent (version 3.4 and above) must be installed on your host

system.

• The host must have a command device connected to the array to collect information from the array.

• You need to enable Logical Unit Number (LUN) security on the port of the required array to de-

termine the Host Group paths in XPWatch.

• You should have selected XPWatch bits during XP Performance Advisor installation. For more in-

formation, see the HP StorageWorks XP Performance Advisor Installation Guide.

Installing XPWatch

To install XPWatch, perform the following steps:

1. Open a web browser.

2. In the browser address line, enter your server name followed by /pa. For example, http(s):/

/[server name]/pa.

You can also access XP Performance Advisor over a secure connection: https://[server

name].[domain name]/pa.

If the DNS server cannot locate the management station and open the default XP Performance

Advisor applet, type http(s)://[IP address]/pa.

NOTE:

The XP Performance Advisor URL is case-sensitive.

The XP Performance Advisor logon screen appears.

Figure 2 shows the XP Performance Advisor logon screen.

XPWatch and XPSketch Reference Guide 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Sem comentários

Hp XP Performance Advisor Software Manual do Utilizador Página 13