HP Computer Drive ESL E Manual do Utilizador descarregar pdf (Página 59)

Library Operations

59ESL E-Series Tape Library User’s Guide

Powering off the library

To power off the library:

1. Place the library off-line, see “Placing the library on-line or off-line” on

page 58.

The library robotics completes any current commands and then stops.

2. Verify that the OCP display indicates “Off-line” from the

Operations screen.

3. Verify that the media picker is empty.

4. Verify that no backups are in process.

5. Turn off the power switch located on the front of the library (see Figure 22 on

page 56).

6. Wait for the library to complete the shutdown process. (This usually takes 30

seconds, but may take up to two minutes.)

7. Open the back door of the library cabinet and flip the breaker switches to the

off position (left). The breaker switches are on the power distribution unit

located on the bottom left side of the library cabinet.

Note: When powering off the library, ensure that the two breaker switches on the

power distribution unit are in the off (left) position.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 161 162

Sem comentários

HP Computer Drive ESL E Manual do Utilizador Página 59