HP t5710 Guia de Início Rápido descarregar pdf (Página 65)

Quick Reference Guide www.hp.com 6-1

Peripherals

Depending on the ports available, the thin client can provide services

for USB, serial, parallel, and PCI devices, as long as the appropriate

software is installed. Factory-installed software is described in the

following section. As they become available, you can install add-ons

for other services using the Altiris Deployment Solution software. For

more information, see Chapter 3, in section “Altiris Client Agent.”

For more information about available peripherals, see the model

QuickSpecs at:

http://h10010.www1.hp.com/wwpc/us/en/sm/WF04a/12454-32

1959-89307-338927-89307.html?jumpid=re_R295_prodexp/buspro

duct/computing/thinclients

Select the model, and then click the quickspec link.

USB to serial converter cable

Use this procedure to determine the port assigned to a device

connecting to the thin client through a USB to serial converter cable.

1. Connect a printer or other device to the serial port of the

converter cable. Do not connect the USB end of the converter

cable to the thin client at this time.

2. Open the Device Manager window (Control Panel > System >

Hardware Tab > Device Manager).

3. A Ports (COM & LPT) listing may or may not display, depending

on thin client model and whether a device driver was previously

installed to a port. If the listing does display, expand it to display

ports currently used.

4. Plug in the USB end of the converter cable to the thin client.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 71 72

Sem comentários

HP t5710 Guia de Início Rápido Página 65