HP 2760p Guia de Início Rápido descarregar pdf (Página 53)

CAUTION: To prevent damage to the memory module, hold the memory module by the edges

only. Do not touch the components on the memory module.

a. Align the notched edge (1) of the memory module with the tab in the memory module slot.

b. With the memory module at a 45-degree angle from the surface of the memory module

compartment, press the module (2) into the memory module slot until it is seated.

c. Gently press the memory module (3) down, applying pressure to both the left and right

edges of the memory module, until the retention clips snap into place.

CAUTION: To prevent damage to the memory module, be sure that you do not bend the

memory module.

8. Align the tabs (1) on the hard drive cover with the notches on the computer.

9. Close the cover (2).

10. Tighten the hard drive cover screws (3).

11. Replace the battery.

Adding or replacing memory modules 45

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Sem comentários

HP 2760p Guia de Início Rápido Página 53