HP ProDesk 600 G4 Base Model Small Form Factor PC Manual do Utilizador descarregar pdf (Página 41)

7. If it is necessary to remove the top hard drive from the 2.5-inch drive cage, follow the 1, 2, 3, 4

sequence (1) stamped in the cage to remove the four Torx-15 M3.0×7.5 screws (2) that secure the hard

drive to the cage.

8. Remove the hard drive from the 2.5-inch hard cage (3).

9. If it is necessary to remove the bottom hard drive from the 2.5-inch drive cage, follow the 1, 2, 3, 4

sequence (1) stamped in the cage to remove the four Torx-15 M3.0×7.5 screws (2) that secure the hard

drive to the cage.

10. Remove the hard drive from the 2.5-inch hard cage (3).

Reverse this procedure to install the hard drives and the 2.5-inch hard drive cage.

Hard drives 33

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 123 124

Sem comentários

HP ProDesk 600 G4 Base Model Small Form Factor PC Manual do Utilizador Página 41