HP Web Jetadmin Software Manual do Utilizador

UPGRADING FIRMWARE using HP Web Jetadmin CONTENTS Overview ...

10 WARNING! Be aware that downgrading firmware has the potential to cause serious consequences on devices. This action should be considered carefully

11 This same Firmware upgrade options window allows for defining multiple threads to perform firmware upgrades in a parallel fashion rather than seri

12 </type> <value>False</value> </property> Since HP Web Jetadmin now reports success only after completing the file d

13 To increase the firmware upgrade thread pool size, perform the following steps: 1. Make a backup copy of the PerfomanceTuning.config.xml file. Thi

14 For non-HP FutureSmart devices: Using a text editor, edit the existing file on the HP Web Jetadmin host system in the following location: C:\Windo

15 However, most of these techniques only allow for upgrading one device at a time, which makes HP Web Jetadmin very valuable in this respect. These

16 3. bin 4. hash This command is optional. It merely displays the download progress. 5. put <filename.dld> /DOWNLOAD Be sure to enter the f

17 6. Verify that the device control panel displays Performing Upgrade. The same technique can be used to upgrade an HP Jetdirect print server (Figu

18 2. Click the Other Settings link, and then click the Firmware Upgrade tab. The model number of the HP Jetdirect card is displayed along with the

19 Send the firmware upgrade using a USB connection 1. Open a DOS command prompt. In Windows NT® 4.0, 2000, or XP, click Start, Run. Type CMD, and t

2 OVERVIEW HP Web Jetadmin has the ability to upgrade the firmware for both HP Jetdirect devices and printers over the network for multiple devices s

20 APPENDIX A—SUPPORTED DEVICES The following table contains a list of all the devices that support firmware upgrades through HP Web Jetadmin and cu

21 © Copyright 2017 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP

3 After the firmware index file is obtained, HP Web Jetadmin uses it to display a list of available images to be downloaded to the client. HP Web Jet

4 UPGRADE DEVICES HP Web Jetadmin can use the images in the repository to upgrade network-connected devices that have older firmware. Note Upgradin

5 The Printer Firmware - Available and Jetdirect Firmware - Available columns show the number of firmware files in the HP Web Jetadmin repository tha

6 For most device firmware, HP Web Jetadmin opens a port 9100 connection and sends the .rfu file as a print job. The device power cycles itself at th

7 Figure 11—Configuration page for a device with HP FutureSmart 3 With HP Web Jetadmin 10.3 SR4, you can view the current HP FutureSmart level (Fig

8 The FutureSmart Level configuration option is available from the Device category on the Config tab (Figure 12). Figure 12—FutureSmart Level config

9 firmware upgrades with qualified images only. Or the administrator can change the FirmwareUpgrade.config.xml (in HP WebJetadmin 10.4 SR2 and above)