HP RP7 Retail System Model 7100 Manual do Utilizador descarregar pdf (Página 16)

4 Setting up and using the scanner

Follow the steps below to connect the scanner and begin communicating with its host.

1. Position the base station (see Positioning the base station on page 10).

2. Connect the base station (see Connecting the base station on page 14).

3. Charge the batteries (see Charging the batteries on page 15).

4. Link to the base station (see Linking the scanner on page 19).

5. Select the interface type (see Selecting the interface type on page 20).

6. Program the scanner as described in Programming the scanner on page 22 (optional, depending on

settings needed).

Positioning the base station

The base station/charger can be set up in a desk top application to hold the reader in three dierent positions

(horizontal, standing, or vertical) in order to provide the most comfortable use depending on the needs.

The base station positions and related clips required for the positions are shown below.

Horizontal: This is preferred unless a dierent position is required.

●

Provides maximum ease when inserting the scanner

●

Requires minimum eort and allows for the attention required to the customer when docking the

scanner

Standing: This is preferred if the scanner is used in stand mode and not often removed from the base station.

10 Chapter 4 Setting up and using the scanner

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Sem comentários

HP RP7 Retail System Model 7100 Manual do Utilizador Página 16