Hp 32SII Manual do Utilizador descarregar pdf (Página 208)

100

101

13–18 Programming Techniques

File name 32sii-Manual-E-0424

Printed Date : 2003/4/24 Size : 17.7 x 25.2 cm

%!

variable

A DSE instruction is like a FOR–NEXT loop with a negative increment.

After pressing a shifted key for ISG or DSE (

{

), you

will be prompted for a variable that will contain the loop–control number

(described below).

The Loop–Control Number

The specified variable should contain a loop–control number ±ccccccc.fffii,

where:



±ccccccc is the current counter value (1 to 12 digits). This value changes

with loop execution.



fff is the final counter value (must be three digits). This value does not

change as the loop runs.



ii is the interval for incrementing and decrementing (must be two digits or

unspecified). This value does not change. An unspecified value for ii is

assumed to be 01 (increment/decrement by 1).

Given the loop–control number ccccccc.fffii, DSE decrements ccccccc to

ccccccc — ii, compares the new ccccccc with fff, and makes program

execution skip the next program line if this ccccccc

≤

fff.

Given the loop–control number ccccccc.fffii, ISG increments ccccccc to

ccccccc + ii, compares the new cccccccc with fff, and makes program

execution skip the next program line if this ccccccc

fff.

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 375 376

Comentários a estes Manuais

Sem comentários

Hp 32SII Manual do Utilizador Página 208

Comentários a estes Manuais

Manuais e produtos relacionados com Calculadoras, organizers Hp 32SII