Hp Parallel Uninterruptible Power System Manual do Utilizador descarregar pdf (Página 85)

Maintenance 85

Set the card for the middle UPS(s) to Pins 2 and 3.

4. Install the Parallel UPS Card into an open X-Slot on the rear of the UPS.

5. Repeat steps 1 through 4 to install a Parallel UPS Card into each UPS to be paralleled.

The HP 3 Phase UPS parallel system automatically assigns identities to each UPS in the system based on

the order in which their Parallel UPS Cards are wired. For more information, see "Auto-identification (on

page 78)" .

6. Verify that all the terminal blocks and jumpers are installed in each UPS.

7. Using the supplied CAT 5 cables, install the Parallel UPS Card wiring between each UPS, connecting

the card OUT port on one UPS to the card IN port on the next UPS.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 114 115

Sem comentários

Hp Parallel Uninterruptible Power System Manual do Utilizador Página 85