Hp Netserver L Server series Manual do Utilizador descarregar pdf (Página 49)

Chapter 5 Installing Additional Boards

d. Close the latch and then close the board clamp onto the edge of the PCI

board. See Figure 5-6.

15. When you have completed the PCI aboard installation, close the Netserver and return

it to the rack where power can be applied.

16. Once the Netserver is returned to normal operation, you may need to install software

drivers.

The drivers for the new PCI board are either part of your existing system software or

included on a flexible diskette or CD-ROM provided with the accessory board.

Step C

Lower Board

Latch

Step B

Insert

Between Tabs

Step A

Open Clamp

Tab R est

Board Clamp

Step D

Close Clamp

Figure 5-6. Clamping Long PCI Boards

Removing the Accessory Board

Follow the same steps as the installation procedure, but in reverse order. Replace the slot

cover. See the preceding sections for details.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 139 140

Sem comentários

Hp Netserver L Server series Manual do Utilizador Página 49