Hp Netserver L Server series Manual do Utilizador descarregar pdf (Página 19)

Chapter 3 Removing and Replacing Covers

Bezel

The bezel connects to the front of the NetServer chassis with two snap-in

connectors at the top front of the chassis and three tabs that fit into three slots on

the bottom front of the chassis. To remove, pull the bezel forward until it

unsnaps, then lift the bezel forward and upward from the chassis face.

Cover 1

Cover 2

Cover 3

Pull here

Bezel Lock

Figure 3-3. Removing the HP NetServer LH 3 Bezel

CAUTION The NetServer covers are heavy. Support them as you remove

them, and allow room to move them away from the NetServer

and for storage.

Cover 1

Once you have removed the bezel, remove cover 1 by unscrewing the thumbscrew

and then pulling the cover forward to disengage it. Lift it outward and away from

the chassis.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 153 154

Sem comentários

Hp Netserver L Server series Manual do Utilizador Página 19