Hp Netserver L Server series Manual do Utilizador descarregar pdf (Página 64)

Chapter 6 Installing an Additional Processor

Removing a Processor and Heatsink

Use this procedure to remove a processor and its heatsink (the heatsink must be

removed before the processor).

CAUTION Take the following precautions when removing processors:

• Wear an anti-static wrist strap and use a static-dissipating

work surface or grounding mat connected to the chassis

when handling components.

• Before removing the processor, touch a grounded

unpainted metal surface on the HP Netserver to discharge

static electricity.

1. Remove the air flow guide. See Chapter 2, "Opening and Closing the HP

Netserver."

2. Use a flathead screwdriver or similar tool to unhook the tool latch on the

heatsink. See Figure 6-6.

Tool

Latch

Figure 6-6. Removing the Heatsink

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 145 146

Sem comentários

Hp Netserver L Server series Manual do Utilizador Página 64