Hp ProLiant BL25p G2 Server-Blade Manual do Utilizador Página 29
- Página / 99
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Hardware options installation 29
•
Both DIMM slots in a memory bank must be populated.
• Both DIMMs in a memory bank must be identical.
• Processor 1 memory bank A must always be populated.
• DIMM banks are active only when the corresponding processor socket is populated.
• If installing only one bank on a processor, populate the bank physically farthest from the processor.
• If mixing DIMM sizes on the same processor, the largest capacity DIMMs must be populated in the
bank farthest from the processor. The smallest capacity DIMMs must be populated in the bank closest
to the processor.
• For optimal performance in most applications, populate the first memory bank for each populated
processor socket.
Installing DIMMs
1. Power down the server blade (on page 13).
2. Remove the server blade (on page 14).
3. Remove the access panel (on page 14).
4. Open the DIMM slot latches.
5. Install the DIMM.
Fibre Channel mezzanine option
An optional dual port FC mezzanine enables FC support for clustering capabilities and SAN connection
when used in conjunction with interconnect devices that support a SAN connection. For more information
about connecting to the SAN, refer to “SAN configuration (on page 44)".
Server blades can be configured for SAN connectivity when used with the following components:
• FC mezzanine
• Supported p-Class server blades
• SAN-compatible interconnect
• SFP transceivers (included in certain FC mezzanine option kits. See the FC mezzanine option
documentation.)
• Optical FC cables (not included)
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel components 7
- Rear panel components 8
- System board components 9
- DIMM slot numbering 10
- System maintenance switch 10
- Internal USB connector 11
- Local I/O cable 11
- Operations 13
- Remove the server blade 14
- Remove the access panel 14
- Operations 15 15
- Overview 16
- Verifying system components 16
- Connecting to the network 17
- Installing a server blade 20
- Completing the configuration 21
- Processor option 22
- Hard drive option 27
- Memory option 28
- Installing DIMMs 29
- NIC mezzanine option 30
- Cabling 34
- Configuration and utilities 38
- Network-based PXE deployment 39
- Deployment infrastructure 40
- Static IP bay configuration 41
- Deployment methods 41
- PXE deployment 42
- CD-ROM deployment 42
- Diskette image deployment 43
- SAN configuration 44
- Configuration tools 45
- HP ROM-Based Setup Utility 46
- Array Configuration Utility 47
- Management tools 48
- ROMPaq utility 49
- Erase Utility 49
- HP Systems Insight Manager 50
- Management Agents 50
- HP Control Tower 52
- Redundant ROM support 52
- Networking tools 53
- Diagnostic tools 54
- Array Diagnostic Utility 55
- Web-Based Enterprise Service 55
- Open Services Event Manager 55
- Keeping the system current 56
- Care Pack 57
- Troubleshooting 58
- Important safety information 59
- Symptom information 60
- Service notifications 61
- Loose connections 61
- Troubleshooting flowcharts 62
- General diagnosis flowchart 63
- Symptoms: 65
- POST problems flowchart 67
- Possible problems: 68
- Faulty KVM device 68
- Faulty video device 68
- OS boot problems flowchart 69
- Troubleshooting 71 71
- Possible causes: 72
- Redundancy failure 72
- Introduction 73
- Troubleshooting 74 74
- Battery replacement 75
- In this section 76
- FCC rating label 76
- FCC logo, United States only 77
- Modifications 78
- Japanese notice 79
- BSMI notice 79
- Korean notice 80
- Laser compliance 80
- Battery replacement notice 80
- Electrostatic discharge 82
- Specifications 83
- Technical support 84
- Customer Self Repair 86
- Technical support 87 87
- Reparo feito pelo cliente 88
- Technical support 89 89
- Technical support 90 90
- Technical support 91 91
- Acronyms and abbreviations 92
- Version Control Agent 95
- Workload Management Pack 95
- Index 96 96
- Index 97 97
- Index 98 98
- Index 99 99
Manuais e produtos relacionados com Hardware de computador Hp ProLiant BL25p G2 Server-Blade
(116 páginas)
(187 páginas)DeVilbiss COMPACT P2-11 manuály
Uživatelské manuály a uživatelské příručky pro Stříkací barva DeVilbiss COMPACT P2-11.
Poskytujeme 2 manuály pdf DeVilbiss COMPACT P2-11 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Specifikace
Comentários a estes Manuais