Hp ProLiant DL145 G3 Server Manual do Utilizador descarregar pdf (Página 44)

Using LO100 44

o On ProLiant ML110 G4 servers, verify or change the following settings:

Configure Console Redirection

— Console Redirection—Enabled

— EMC Support (SPCR)—Enabled

— Flow Control—None

— Redirection After BIOS POST—Always

— Terminal Type—VT100

— Sredir Memory Display Delay—No Delay

I/O Device Configuration—Configure IO Port

— Serial Port 1 Address—3F8/IRQ4

o On ProLiant ML115 G1 servers, verify or change the following settings:

Configure Console Redirection

— Console Redirection—Enabled

— EMS Support (SPCR)—Enabled

— Flow Control—None

— Redirection After BIOS POST—Always

— Terminal Type—VT100

— Sredir Memory Display Delay—No Delay

I/O Device Configuration-Configure IO Port

— Serial Port 1 Address—3F8/IRQ4

o On ProLiant DL140 G3 and ProLiant DL145 G3 servers, verify or change the following settings:

Console Redirection

— Console Redirection—Enabled

— EMS Console—Enabled

— Baud Rate—115.2K

— Console Type—VT100+

— Flow Control—None

— Continue C.R. after POST—Enabled

I/O Device

— Serial Port Mode—BMC

— Serial Port A—Enabled

— Base I/O address—3F8

— Interrupt—IRQ 4

o On ProLiant ML150 G3 servers, verify or change the following settings:

Console Redirection

— BIOS Serial console—Enabled

— EMC Support (SPCR)—Enabled

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 62 63

Sem comentários

Hp ProLiant DL145 G3 Server Manual do Utilizador Página 44