Hp ProLiant DL360p Gen8 Server Manual do Utilizador descarregar pdf (Página 55)

Hardware options installation 55

Connect the cable to the rear of the DVD drive, and then route the cable through the DVD drive bay.

b. Install the DVD drive.

c. Route and connect the other end of the cable to the SATA DVD-ROM drive connector on the system

board, using the same steps provided for the SFF DVD-ROM drive.

8. Install the access panel (on page 23).

9. Slide the server into the rack.

10. Connect each power cord to the server.

11. Connect each power cord to the power source.

12. Power up the server (on page 20).

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 117 118

User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Component identification 7
• 4 LFF 8
• 10 SFF 8
Front panel LEDs and buttons 9
Rear panel components 10
Rear panel LEDs and buttons 11
System board components 12
DIMM slots 13
System maintenance switch 14
NMI jumper 14
Systems Insight Display LEDs 15
Device numbers 17
Fan modules 18
Component identification 19 19
Operations 20
10 SFF configuration 22
Remove the access panel 23
Install the access panel 23
Remove the PCI riser cage 24
Install the PCI riser cage 25
Optimum environment 27
Temperature requirements 28
Power requirements 29
Rack warnings 30
Installing hardware options 31
Registering the server 34
Introduction 35
Remove the heatsink blank: 36
Caged heatsink blank 36
Screw-down heatsink blank 36
Caged heatsink 40
Screw-down heatsink 40
Memory options 42
HP SmartMemory 44
DIMM identification 46
Memory configurations 46
Online spare population 48
Installing a DIMM 49
1. Remove the drive blank 51
2. Prepare the drive 51
Controller options 56
Front video adapter option 58
FlexibleLOM option 59
Expansion board option 61
48V DC power supply option 64
Replace the safety cover 67
Rack bezel option 68
Cabling 72
Chipset SATA cable option 73
Cabling 75 75
FBWC capacitor pack cabling 77
Server mode 78
HP product QuickSpecs 78
HP iLO Management 78
Active Health System 79
Intelligent Provisioning 80
HP Insight Diagnostics 81
Erase Utility 81
HP Service Pack for ProLiant 82
HP ROM-Based Setup Utility 83
Boot options 84
Configuring AMP modes 84
Utilities and features 85
ROMPaq utility 87
Automatic Server Recovery 87
USB support 87
Redundant ROM support 87
Keeping the system current 88
ProLiant servers 89
Troubleshooting 90
System battery 91
System battery 92 92
Regulatory information 93
Warranty information 94
Electrostatic discharge 95
Specifications 96
(94% efficiency) 100
Support and other resources 103
Customer Self Repair 105
Reparo feito pelo cliente 107
Acronyms and abbreviations 111
Documentation feedback 114
Index 115 115
Index 116 116
Index 117 117
Index 118 118

Comentários a estes Manuais

Sem comentários

Hp ProLiant DL360p Gen8 Server Manual do Utilizador Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Hp ProLiant DL360p Gen8 Server