Hp ProLiant DL380e Gen8 Server Manual do Utilizador descarregar pdf (Página 55)

Hardware options installation 55

Retain the blank for future use.

5. Remove the access panel (on page 23).

6. Remove the air baffle (on page 24).

7. Remove the primary PCI riser cage ("Remove the PCI riser cages" on page 25).

8. Install the optical drive into the bay.

9. Connect the optical drive cable to the optical drive.

10. Route the optical drive cable along the side of the system board, and then connect the cable to the

system board.

11. Install the primary PCI riser cage ("Install the PCI riser cages" on page 26).

12. Install the air baffle (on page 24).

13. Install the access panel (on page 24).

14. Install the server into the rack ("Installing the server into the rack" on page 33).

15. Power up the server (on page 20).

Hot-plug fan module option

To provide sufficient airflow to the system if a primary fan fails, the server supports redundant fans.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 141 142

Sem comentários

Hp ProLiant DL380e Gen8 Server Manual do Utilizador Página 55