Hp DL385 Manual do Utilizador descarregar pdf (Página 28)

Server operations 28

Press the Power On/Standby button to place the server in standby mode (2). When the server

activates standby power mode, the system power LED changes to amber.

5. If the server is installed in a rack, locate the server by identifying the illuminated rear UID LED button.

6. Disconnect the power cords.

The system is now without power.

Extend the server from the rack

1. Pull down the quick release levers on each side of the server to release the server from the rack.

2. Extend the server on the rack rails until the server rail-release latches engage.

WARNING: To reduce the risk of personal injury or equipment damage, be sure that the

rack is adequately stabilized before extending a component from the rack.

WARNING: To reduce the risk of personal injury, be careful when pressing the server

rail-release latches and sliding the server into the rack. The sliding rails could pinch your

fingers.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 123 124

Sem comentários

Hp DL385 Manual do Utilizador Página 28