Hp DL385 Manual do Utilizador descarregar pdf (Página 47)

Hardware options installation 47

Install the DIMM.

6. Install the access panel ("Installing the access panel" on page 29).

Hot-plug SCSI hard drive options

When adding SCSI hard drives to the server, observe the following general guidelines:

• A maximum of 14 SCSI devices per channel can be added.

• Each SCSI drive must have a unique ID. The system automatically sets all SCSI IDs.

• The SCSI ID for each hot-plug hard drive is set automatically to the next sequential ID number in a

series beginning with ID0.

• If only one SCSI hard drive is used, install it in the bay with the lowest number.

• Hot-plug hard drives must be either Wide Ultra2, Ultra3, or Ultra320 SCSI types. Mixing these types

with other drive standards degrades the overall performance of the drive subsystem.

• Drives must be the same capacity to provide the greatest storage space efficiency when drives are

grouped together into the same drive array.

SCSI IDs

The server supports single- or dual-channel hard drive configurations. The single-channel configuration

(simplex) supports up to six hard drives on one channel. The dual-channel configuration (duplex) supports

two hard drives on one channel (SCSI IDs 0 and 1) and up to four hard drives on the other channel (SCSI

IDs 2 through 5).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 123 124

Sem comentários

Hp DL385 Manual do Utilizador Página 47