Hp A7818-IE002 Manual do Utilizador descarregar pdf (Página 131)

Installing Or Replacing Parts And Accessories

Installing SCSI Drives

Chapter 6

131

Verifying Your SCSI Drive

1. Switch on the computer.

2. To enter the SCSI Conﬁguration Utility press Ctrl-C when prompted during the

workstation’s start-up routine.

3. Verify or modify the conﬁguration of your new SCSI hard disk drive.

For more information on conﬁguring a SCSI hard disk drive, refer

to the SCSI User’s Guide.

4. When conﬁguration is complete, exit the SCSI Conﬁguration Utility and re-boot the

computer to save any changes.

additional guide rails

Extra guide rails are supplied for the installation of additional mass storage devices.

These are inside the workstation, three pairs attached on the side of the front access

bays and one pair on the chassis beam. Depending on the device to be installed,

dedicated guide rails are required and are easily recognized by their distinct shape,

markings and color.

SCSI ID = 7

❐

■

SCSI ID = 8

■

❐

SCSI ID = 9

■

❐

■

SCSI ID = 10

■

❐

■

❐

SCSI ID = 11

■

❐

■

SCSI ID = 12

■

❐

SCSI ID = 13

■

❐

■

SCSI ID = 14

■

❐

SCSI ID = 15

■

Table 6-2 Pins to Jumper (Continued)

Drive Style/SCSI ID Pins to Jumper (n)

Number of SCSI

Hard Disks

Standard HP SCSI Conﬁguration

(SCSI ID numbers)

1 ID0

2 ID0, ID1

3 ID0, ID1, ID2

4 ID0, ID1, ID2, ID3

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 195 196

Comentários a estes Manuais

Sem comentários

Hp A7818-IE002 Manual do Utilizador Página 131

Comentários a estes Manuais

Manuais e produtos relacionados com Computadores Hp A7818-IE002