Hp COMPAQ DC5750 Manual do Utilizador Página 116

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 214
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 115
7–10 437963-001 Service Reference Guide, dc5750
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
6. Remove the two M3 metric guide screws in the lower holes on each side of th edrive. HP has
provided four extra M3 metric guide screws on the front of the chassis, under the front bezel.
The M3 metric guide screws are black.
Ä
CAUTION: Use only 5-mm long scres as guide screws. Longer screws can damage the internal
components of the drive.
When replacing the drive, transfer the four M3 metric guide screws from the old drive to the new
one.
7. Align the guide screws on the drive with the slots on the chassis. Slide the drive all the way
down 1 then slide it forward 2 until it locks into place.
Vista de página 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 213 214

Comentários a estes Manuais

Sem comentários