Hp WS460C G6 Manual do Utilizador descarregar pdf (Página 15)

Creating a custom Windows image 15

Creating a custom Windows image

Creating a custom Windows image for the WS460c

Workstation Blade

This chapter describes how to create a custom Windows® image for the WS460c Workstation Blade. You

must include factory-installed components in your custom Windows® image.

Creating a custom Windows® image process

There are several ways to create a custom Windows image. This section describes creating the image by

using the Windows® CD and adding the required software such as device drivers. All interactions are

accomplished using a keyboard, mouse, CD/DVD drive, and monitor connected to the Local I/O Cable.

Required components

To create a custom Windows® image, the following software and hardware components are required:

• A method of connecting a diskette drive and a CD/DVD drive to the blade. This connection can be

made in any of the following:

o Local I/O Cable—Connect a USB hub, USB keyboard, USB mouse, USB CD/DVD drive, USB

diskette drive, and a monitor to the Local I/O Cable. The USB hub is required, because the Local

I/O Cable only has two USB connectors while four are required.

o PC—From a PC, use iLO 2 Remote Console and virtual media to connect a diskette drive and

CD/DVD drive to the blade.

• Microsoft® Windows® media—The Microsoft® Volume License media or a retail version can be used.

You do not need to activate Volume License media.

• HP Remote Graphics Software

• If you are running Windows® XP 32-bit Edition, you must store the following files in the root directory

of a diskette containing the HP Smart Array P410i SAS controller drivers:

o hpcissm2.cat

o hpcissm2.sys

o hpcissx2.inf

o txtsetup.oem (created by the software component for Windows® XP 32-bit Edition)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 46 47

Sem comentários

Hp WS460C G6 Manual do Utilizador Página 15