HP D2D2502i Guia do Utilizador descarregar pdf (Página 140)

vtl create library

Description of Command Function

Creates a virtual tape library. In addition, a virtual tape cartridge is created in every slot in the

virtual library.

Command Syntax

vtl create library [SETX] [name <string>] [interface {iSCSI|FC}] [

LibEmulation {Generic|MSL2X24|MSL4X48|MSL8X96|EML|ESL}] [DriveEmulation

{LTO2|LTO3|LTO4|LTO5|UltriumVT}] [NoOfSlots <number>] [CartSize

{10|25|50|100|200|400|800|1000|1200|1400|1600|3200}] [NoOfDrives

<number>] [Port <number> [,<num>]] [iSCSIname <string>]

[iAuthenticationEnable {yes|no}] [iUsername <string>] [iSecret <string>]

[tAuthenticationEnable {yes|no}] [tUsername <string>] [tSecret <string>]

[BarcodeLength {6|8}]

Command Authority

Administrator

Command Object Requirements

• SET

– This object defines the service set into which virtual tape library will be added. X is

the numeric index of the service set.

• LIB

– This object is not used within the command sequence; it is created by the command.

The object represents the virtual tape library created by the command. X is a numeric index.

Command Parameter Requirements

• name – This optional parameter is used to create a human readable label for the virtual tape

library created by this command. The value is a text string of up to 30 characters. If the value

contains spaces, the value must be enclosed within quotations. If not included in the command,

the label is defined by the text “Library” followed by the numeric index X defined for the LIBX

object created by this command.

• Interface – This optional parameter defines the physical interface to be used by the virtual

library created by this command. The value is either FC or iSCSI.For single-node products,

if the parameter is not defined, the default below is used:

Default InterfaceStoreOnce System Type

FCmulti-node

iSCSIsingle-node

• LibEmulation – This optional parameter defines the type of physical library to be emulated by

the virtual tape library created by this command. The values are defined in the Command

Syntax. If the parameter is not defined, the default Generic is used. The characteristics for the

different emulation types are described:

Size of CartridgeNo. of Mail SlotsNo. of SlotsNo. of DrivesDrive EmulationEmulation Type

800 GB181LTO4Generic

800 GB1242LTO4MSL2X24

800 GB1484LTO4MSL4X48

800 GB1968LTO4MSL8X96

800 GB1961LTO4EML

800 GB1961LTO4ESL

140 Alphabetical List of Commands and Details

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 177 178

Comentários a estes Manuais

Sem comentários

HP D2D2502i Guia do Utilizador Página 140

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores HP D2D2502i