Hp E1367A Manual do Utilizador descarregar pdf (Página 21)

Tree Configuration Figure 2-3 shows a typical tree configuration which uses two RF

multiplexers to provide a 1 x 12:1 multiplexer. This configuration provides

isolation of test points while maintaining characteristic impedance. With

tree configuration, signal delay time is more than doubled since the signal

must pass through two channel banks plus extra cabling. Keep cables as

short as possible, especially between channel banks, to minimize delay.

Figure 2-3. Typical Tree Configuration

Chapter 2 Configuring the HP E1366A/E1367A RF Multiplexers 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

Sem comentários

Hp E1367A Manual do Utilizador Página 21