HP Z600 Especificações descarregar pdf (Página 148)

6. Angle the card into the expansion card guide. Align the PCIe card keyway with the slot key, and

then firmly seat the card in the slot as shown in the following figure

If required by the card, connect the auxiliary power cable to the card (not illustrated), or other cables

or accessories described in the card instructions.

Figure 5-78 Installing a PCIe card

7. Close the expansion card retention clamp by rotating it downward

NOTE: It is normal for the expansion card retention clamp to have a slight (5-10 degree) angle

when closed. If the angle is greater than this, open the clamp and ensure that all cards are properly

seated and all the brackets are mated to the chassis, then re-close the clamp.

136 Chapter 5 Replacing components ENWW

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 237 238

Sem comentários

HP Z600 Especificações Página 148