HP GbE2c Manual do Utilizador descarregar pdf (Página 107)

Configuration Menu 107

Table 99 Port Configuration Menu options

Command Description

gig Displays the Gigabit Ethernet Physical Link Menu.

aclqos Displays the Access Control List (ACL)/Quality of Service (QoS)

configuration menu.

8021ppri Configures the port’s 802.1p priority level.

pvid <1-4095> Sets the default VLAN number which will be used to forward frames

which are not VLAN tagged. The default number is 1.

Note: VLAN 4095 is reserved for switch management.

name <1-64 characters>|none Sets a name for the port (maximum 64 characters). The assigned port

name displays next to the port number on some information and statistics

screens.

rmon enable|disable Enables or disables Remote Monitoring for the port. RMON must be

enabled for any RMON configurations to function.

tag enable|disable Disables or enables VLAN tagging for this port. It is disabled by default.

tagpvid enable|disable Disables or enables VLAN tag persistence. When disabled, the VLAN tag

is removed from packets whose VLAN tag matches the port PVID. The

default value is enabled.

*media Displays the current port’s transmission media: copper, fiber, or

auto

This option is only available on uplink ports.

This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch.

*fiber Configures the port’s transmission media as fiber.

This option is only available on uplink ports.

This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch.

*copper Configures the port’s transmission media as copper.

This option is only available on uplink ports.

This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch.

*automedia Configures the port’s transmission media as auto.

This option is only available on uplink ports.

This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch.

brate <0-262143>|dis Limits the number of broadcast packets per second to the specified value.

If disabled (

dis), the port forwards all broadcast packets.

mrate <0-262143>|dis Limits the number of multicast packets per second to the specified value. If

disabled (

dis), the port forwards all multicast packets.

drate <0-262143>|dis Limits the number of unknown unicast packets per second to the specified

value. If disabled (

dis), the port forwards all unknown unicast packets.

ena Enables the port.

dis Disables the port. To temporarily disable a port without changing its

configuration attributes, see the “Temporarily disabling a port” section

later in this chapter.

cur Displays current port parameters.

* indicates commands that are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 174 175

Comentários a estes Manuais

Sem comentários

HP GbE2c Manual do Utilizador Página 107

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede HP GbE2c