HP GbE2c Manual do Utilizador descarregar pdf (Página 19)

Installing the switch 19

Installing the switch

CAUTION: Do not cable the switch until after configuration.

IMPORTANT: Make sure that the server NIC configuration matches the switch bay selected.

NOTE: When installing two switches, there are two switch interconnect ports between adjacent I/O bays.

These ports (17 and 18) are disabled by default. The ports must be manually enabled to use.

To install the switch:

1. Remove the blank.

2. Install the switch.

Accessing the switch

The switch is accessed remotely using the Ethernet ports or locally using the DB-9 management serial port.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Sem comentários

HP GbE2c Manual do Utilizador Página 19