HP ProCurve Series Manual do Utilizador descarregar pdf (Página 36)

2-14

Installing the Switch

Installation Procedures

Installing the Switch

Equipment

Cabinet

Note

The 12-24 screws supplied with the switch are the correct threading for

standard EIA/TIA open 19-inch racks. If you are installing the switch in an

equipment cabinet such as a server cabinet, use the clips and screws that came

with the cabinet in place of the 12-24 screws that are supplied with the switch.

Complete step 1, and plan which four holes you will be using in the cabinet

and install all four clips. Then proceed to step 2.

Rack Mounting the Switch 3500yl-24G

1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting

brackets to the switch with the included 8-mm M4 screws.

Figure 2-7. Attaching the mounting brackets to the switch.

Note The mounting brackets have multiple mounting holes and can be rotated

allowing for a wide variety of mounting options. These include mounting the

switch so its front face is flush with the face of the rack, or mounting it in a

more balanced position as shown in the illustration.

8 mm

M4 screws

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 109 110

Sem comentários

HP ProCurve Series Manual do Utilizador Página 36