HP 10BASE-T Guia do Utilizador descarregar pdf (Página 30)

ThinLAN Connections

To connect a ThinLAN cable to the hub’s ThinLAN port:

1. Attach a ThinLAN cable section to one side of a BNC “T” connector.

(Hewlett-Packard offers BNC “T” connectors with insulating covers.

Order product number HP 92227A.)

2. Attach another ThinLAN cable section or a 50-ohm terminator to the

other side of the “T” connector.

3. Attach the “T” connector to the ThinLAN port.

4. Cover the BNC connector with an insulating cover.

To remove a ThinLAN cable, reverse this process.

Note Each ThinLAN cable segment must be terminated using a 50-ohm termi-

nator at each end. In the illustration above, a 50-ohm terminator would

be placed on one side of the BNC “T” connector if that connector is at

the end of the cable segment.

BNC “T”

connector

ThinLAN cable

50-ohm

terminator

Installing the

HP AdvanceStack Hubs

Installing the HP AdvanceStack 10Base-T Hubs

1-17

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 135 136

Sem comentários

HP 10BASE-T Guia do Utilizador Página 30