HP 24SII Manual do Utilizador descarregar pdf (Página 47)



 



  



NOTE: Ports using this configuration will support XON/XOFF

handshaking only. You must enable XON/XOFF handshaking in

configuration mode for these ports (see

Section 8.8.1

) and on the

equipment that will connect to these ports.

Ports on the M24SII-V07 module using EIA-232 Protocol, 4-wire

Operation, and bidirectional Printer Sharing Mode utilize the following

pins and signals for communication:

RJ-11 PIN-OUT INFORMATION

PIN SIGNAL

EIA-232

DIRECTION DESCRIPTION

1 NC ---- No connection

2 TX Output Transmit Data

3 RX Input Receive Data

4 GND ---- Signal Ground

If you are connecting a device to a port on the M24SII-V07 module

using EIA-232 Protocol, 4-wire Operation, and bidirectional Printer

Sharing Mode, please see

Appendix A.7.2

for device adapter pinouts

and recommended cabling.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 167 168

Sem comentários

HP 24SII Manual do Utilizador Página 47