HP 3C509B-TP Manual do Utilizador

Etherlink IIIB ISA Network Interface Card (10BT)3C509B-TPInstallation Guide

2 Connecting to a Netware 4.11 ServerWindows for Workgroups6 Remove the 3COM cards driver diskette and insert Netware client for DOS and MS-Windows di

2 Connecting to a Netware 4.11 ServerWindows for Workgroups10 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter.11 Inse

2 Connecting to a Netware 4.11 ServerWindows for Workgroups

2 Connecting to a Netware 4.11 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• 3COM Etherlink 3C509-B ethe

2 Connecting to a Netware 4.11 ServerWindows 95 SR26 Remove the 3com cards driver diskette and restart the machine.7 After windows loads, click on “S

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.113 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.11Requi

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.117 After windows loads, open the “NETWORK” Program Group, and double-click on “

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.11

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.11

3 Connecting to a Windows NT Server 3.51Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2.• 3COM Etherlink 3C509-B Ethernet ca

NoticeThe information contained in this document is subject to change without notice.Hewlett-Packard makes no warranty of any kind with regard to this

3 Connecting to a Windows NT Server 3.51Windows 95 SR2under the heading “Device Configuration.”6 If changes are required, save those changes and exit

3 Connecting to a Windows NT Server 3.51Windows 95 SR2an HP preloaded HDD, set the path to “C:\MASTERS\WIN95\SYSTEM\CABS\”) 21 To complete the instal

3 Connecting to a Windows NT Server 3.51Windows 95 SR2

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51Windows NT Workstation Version 3.51Requirements• HP Vectra with Microsoft

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51If you are using a Vectra VE7/VE8, follow the instructions below to comple

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51q At the "TCP/IP Configuration" screen, choose to use DHCP or en

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.5119 Choose to install all applicable TCP/IP options and select “Continue.”

3 Connecting to a Windows NT Server 3.51Windows NT Workstation 4.0Windows NT Workstation 4.0Requirements• HP Vectra with Windows NT Workstation 4.0 S

3 Connecting to a Windows NT Server 3.51Windows NT Workstation 4.06 If changes are required, save those changes and exit.7 Remove the 3com cards driv

3 Connecting to a Windows NT Server 3.51Windows NT Workstation 4.025 When “Windows NT is now ready to start the network…” click on “Next.”26 Specify

1 Connecting to a Netware 3.12 ServerWindows for Workgroups1 Connecting to a Netware 3.12 ServerWindows for WorkgroupsRequirements• HP Vectra with DOS

3 Connecting to a Windows NT Server 3.51Windows NT Workstation 4.0

4. Connecting to a Windows NT Server 4.0Windows for Workgroups Ver. 3.114. Connecting to a Windows NT Server 4.0Windows for Workgroups Ver. 3.11Requi

4. Connecting to a Windows NT Server 4.0Windows for Workgroups Ver. 3.117 After windows loads, open the “NETWORK” Program Group, and double-click on “

4 Connecting to a Windows NT Server 4.0Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2.• 3COM Etherlink 3C509-B Ethernet card

4 Connecting to a Windows NT Server 4.0Windows 95 SR26 If changes are required, save those changes and exit.7 Remove the 3Com Software driver diskette

4 Connecting to a Windows NT Server 4.0Windows 95 SR2“C:\MASTERS\WIN95\SYSTEM\CABS\”) 22 To complete the installation, select “Yes” to restart your co

4 Connecting to a Windows NT Server 4.0Windows 95 SR2

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.51Windows NT Workstation Version 3.51Requirements• HP Vectra with Microsoft Wi

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.517 Remove the 3com software driver diskette and reboot the machine.8 After wi

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.51administrator)23 At the “Domain/Workgroup Settings” Dialog Box, click on “OK

1 Connecting to a Netware 3.12 ServerWindows for Workgroups4 Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.51

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0Windows NT Workstation 4.0Requirements• HP Vectra with Windows NT Workstation 4.0 Ser

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.06 If changes are required, save those changes and exit.7 Remove the 3com cards driver

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.025 When “Windows NT is now ready to start the network…” click on “Next.”26 Specify yo

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0

Version Number 3Com 3c509 Rev.1

1 Connecting to a Netware 3.12 ServerWindows for Workgroups9 Select 16-bit LAN Drivers and hit the enter key.10 Page down the Board Drivers list to “U

1 Connecting to a Netware 3.12 ServerWindows for Workgroups

1 Connecting to a Netware 3.12 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• 3COM Etherlink 3C509-B ethe

1 Connecting to a Netware 3.12 ServerWindows 95 SR25 If changes are required, save those changes and exit.6 Remove the 3com cards driver diskette and

2 Connecting to a Netware 4.11 ServerWindows for Workgroups2 Connecting to a Netware 4.11 ServerWindows for WorkgroupsRequirements• HP Vectra with D