HP 510x Guia do Utilizador descarregar pdf (Página 36)

36 TCP/IP Configuration ENWW

4. At the Telnet prompt “>” type:

parameter: value

then press Enter, where parameter refers to the configuration

parameter you are defining, and value refers to the definitions

you are assigning to that parameter. Each parameter entry is

followed by a carriage return.

See Table 3.3 for examples on assigning configuration

parameters.

5. Repeat step 4 to set any additional configuration parameters.

6. When you have finished typing the configuration parameters,

type:

quit

and press Enter to activate the configuration parameters.

To exit without activating parameters, type exit and press

Enter.

Telnet Configuration Parameter Examples

The examples in Table 3.3 show how to use Telnet configuration

commands.

Note If a parameter is supplied by the DHCP server, its

value cannot be changed using Telnet without

disabling DHCP.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 101 102

Sem comentários

HP 510x Guia do Utilizador Página 36