HP Cloud OS for Moonshot Manual de Instalação descarregar pdf (Página 23)

Edit the Nova_Flat Network

To edit the Nova_Flat network:

On the Operational Dashboard, select the Environment tab > Networks.

Click Edit Network for the public Network Type.

Click each tab: Network, VLAN, and Router, one by one, to perform the following actions:

On the Network tab, specify the Subnet and Netmask of your dedicated public IP address range.

Do not change:

Bridge Enabled = False

On the VLAN tab, do not change:

VLAN Enabled = False

VLANID = 172

On the Router tab, in the Router box, enter the Gateway IP address of your Public IP address

range. The Router Preference default value is 10 and is sufficient.

Click Update Network to save your changes.

Edit the Nova_Flat Address Ranges

To edit the Nova_Flat address ranges:

In the Nova_Flat Edit Network drop-down list, select Edit Address Ranges to open the Address Ranges

dialog.

The following fields are pre-populated:

Network Type

Subnet values

Node Type - It is set for three types: Host, Router, DHCP.

IPV4 Start Addr displays the start of the IP address range for all three node types.

IPV4 End Addr displays the end of the IP address range for all three node types.

Make the required changes as per your environment.

(Optional) Click Add Address Range to add a set of address range options to the bottom of the Edit

Address Ranges dialog box. Each time you click Add Address Range, you add another set of address

range options to be filled in. Note: Provide the IP address range corresponding to the network address.

Click Update Address Ranges to save your changes.

page-footer-left

page-footer-right

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Sem comentários

HP Cloud OS for Moonshot Manual de Instalação Página 23