HP Fiber-Optic Hub Plus Guia do Utilizador descarregar pdf (Página 17)

Installation

This chapter describes how to install and configure the HP Fiber-Optic Hub Plus, and verify

that it is operating correctly.

Installation Summary

The steps to install the HP Fiber-Optic Hub Plus are:

1. Mount the hub (in a rack, on a wall, or on a table).

2. Plug in the hub and verify its operation.

3. Connect the hub to the networks and network devices.

4. Customize the hub’s configuration if necessary (for example, because you want to turn

off the unused ports, or because the hub will be managed remotely from a network

management station on an IP network).

The details for these steps are provided in the rest of this chapter.

Tools and equipment needed for mounting the hub in a rack or on the wall:

Phillips (cross-head) number 1 screwdriver (for rack or wall mounting)

four

⁄

-inch number 12 wood screws or equivalent (for wall mounting only)

Installation 2-1

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 83 84

Sem comentários

HP Fiber-Optic Hub Plus Guia do Utilizador Página 17