HP NC373F Manual do Utilizador descarregar pdf (Página 10)

Installing an adapter 10

Using a correctly sized slotted screwdriver, carefully remove the two board lock screws located at

the top and bottom of the connector.

2. Remove the standard profile bracket and place the low profile bracket over the connector. Be careful

not to damage the connector or bind the low profile bracket to the connector.

Connecting the network cable

The HP NC373F PCI Express Multifunction Gigabit Server Adapter uses an LC fiber port. This port

supports multimode fiber with a maximum cable length dependent on the fiber type, mode, and cable

size. See Specifications (on page 11) for the maximum cable length.

To insert the LC connector into the adapter port, line up the slot on the fiber connector with the adapter

and gently push until the retainers click into place.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sem comentários

HP NC373F Manual do Utilizador Página 10