HP StorageWorks Enterprise File Services WAN Accelerator Manual de Instalação descarregar pdf (Página 12)

10 1 - INSTALLING THE BYPASS NICS

Required Tools

and Equipment

You will need the following tools and equipment to install the bypass NICs:

 A T-15/T-10 Torx screwdriver

 Straight-through cables to connect the LAN ports to the LAN switches

 Crossover cables to connect the WAN ports to the WAN routers

IMPORTANT: Ensure that you follow proper Electrostatic Discharge (ESD) procedures when

you handle the bypass NICs or HP EFS WAN Accelerator. See “Electrostatic Discharge

Guidelines” on page 5 for procedures.

Installing the bypass NICs in an HP ProLiant

DL320-510, DL320-1010, DL320-2010, DL320-

520, DL320-1020, or DL320-2020

See the HP ProLiant DL320 Generation 4 Server Maintenance and Service Guide

procedures for PCI Riser Board Assembly and Expansion Board removal and

replacement.

Installing the bypass NICs in an HP ProLiant

DL380-3010 or DL380-5010

See the HP ProLiant DL380 Generation 4 Server Maintenance and Service Guide

procedures for PCI Riser Cage and Expansion Board removal and replacement.

IMPORTANT: When installing a Bypass NIC into the DL380-3010 or DL380-5010, use the

lowest empty PCI-X slot available. The slots are numbered from the lowest physical slot (slot 1)

to the highest physical slot (slot 3). Please refer to the HP ProLiant DL380 Generation 4 Server

Maintenance and Service Guide for an illustration and description of the PCI-X slots.

1 2 ... 7 8 9 10 11 12 13 14

Sem comentários

HP StorageWorks Enterprise File Services WAN Accelerator Manual de Instalação Página 12