
HP DL380z Generation8 (Gen8) Virtual
Workstation
XXXX-XXXXENW -- Worldwide — June , 2014
to the HP DL380z Gen8, which is selected in Step 2 for the "Configuration
Information - Factory Integrated Models" section. This option is for upgrade or
change from original configuration.
NOTE: FLR Indicates new HP FlexibleLOM Adapter series.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP Adapter
NOTE: 10Gb Ethernet requires the use of the QSFP to SFP+ adapter P/N
655874-B21.
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
NOTE: The following Riser Cage Kits should be added in Step 2
("Configuration Information - Factory Integrated Models") using the FIO Riser
Cage Kits. The following two options are for upgrade or change from original
configuration or for non-FIO orders.
HP DL380p Gen8 Double Wide Slot1 Riser Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the primary
position only, and supports one double wide card and a single PCI card in this
riser.
NOTE: This riser supports one single wide, or one double wide GPU option in
the primary riser position
HP DL380p Gen8 Double Wide Slot2 Riser Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the primary
position only, and supports one double wide PCIe card or 2 single wide PCIe
card in this riser.
NOTE: This riser supports one single wide, or one double wide GPU option in
the secondary riser position
NOTE: Mixing of power supplies in the same system is not supported. All
power supplies must be of the same output and efficiency rating. If non-
matched power supplies are inserted, you will get errors, and operation will fail.
NOTE: Power Supply Kits should be added in Step 2 ("Configuration
Information - Factory Integrated Models") using the FIO Power Supply Kits.
The following option is for upgrade or change from original configuration or for
non-FIO orders.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supply offers 94% Efficiency with support for
Intelligent Power Discovery.*
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Option Kits contain optional power supply, an IEC power cable and
PDU IEC cables.
NOTE: HP DL380z Gen8 ship with an IEC-IEC power cord used for rack
mounting with Power Distribution Units (PDUs). For a full list of optional HP
power cords please go to: www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power
supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
NOTE: Each DL380z Gen8 system will accommodate up to three single-width
or two double width NVIDIA Quadro PCIe cards for high-end Quadro graphics,
or up to two NVIDIA GRID K2 PCIe cards for virtual workstation desktop
graphics.
Comentários a estes Manuais