
5.
Remove the primary hard drive cover (see
Primary hard drive cover on page 52).
6. Remove the following components:
a.
Hard drive (see
Hard drive on page 53).
b. Secondary hard drive (see
Secondary hard drive on page 55).
c. Optical drive (see
Optical drive on page 63).
d. Keyboard (see
Keyboard on page 65).
e. Top cover (see
Top cover on page 67).
f. Display assembly (see
Display assembly on page 73).
g. USB board (see
USB board on page 86).
Remove the subwoofer:
1. Disconnect the subwoofer cable from the system board (1).
2. Remove the three Phillips PM2.5×4.0 broadhead screws (2) that secure the subwoofer to the base
enclosure.
3. Remove the subwoofer (3).
Reverse this procedure to install the subwoofer.
92 Chapter 4 Removal and replacement procedures
Comentários a estes Manuais