
HP ProDesk 490 G1 Microtower Business PC
Technical Specifications – Networking/Communication
c04123126 —14695 — Worldwide — Version 9 —January 21, 2015
Radio off: 100 mW (WLAN unassociated)
ACPI compliant power management
802.11 compliant power saving mode
Receiver Sensitivity
Note: Receiver sensitivity is
measured at a packet error
rate of 8% for 802.11b (CCK
modulation) and a packet
error rate of 10% for
802.11a/g (OFDM
modulation).
802.11g:-90 dBm (6 Mbps), -89 dBm (9 Mbps), -87 dBm (12 Mbps), -85 dBm (18 Mbps), -82 dBm
(24 Mbps), -79 dBm (36 Mbps), -76 dBm (48 Mbps), -74 dBm (54 Mbps)
802.11b:-95 dBm (1 Mbps), -93 dBm (2 Mbps), -91 dBm (5.5 Mbps), -88 dBm (11 Mbps)
802.11g:-90 dBm (6 Mbps), -89 dBm (9 Mbps), -87 dBm (12 Mbps), -85 dBm (18 Mbps), -82 dBm
(24 Mbps), -79 dBm (36 Mbps), -76 dBm (48 Mbps), -74 dBm (54 Mbps)
2 U.FL type connectors (output impedance of 50 ± 2 ohms)
PCI-Express Half-MiniCard
0.12 x 1.06 x 1.18 in (3.1 x 26.8 x 30.0 mm)
Operating:
Non-operating:
14° to 158° F (-10° to 70° C)
-40° to 176° F (-40° to 80° C)
Operating:
Non-operating:
10% to 90% (non-condensing)
5% to 90% (non-condensing)
Operating:
Non-operating:
0 to 50,000 ft (15,240 m)
LED Amber - Radio OFF; LED White - Radio ON
Realtek 2-channel ALC221 codec
Front microphone-In (150-K ohm Input Impedance)
Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio
driver)
Rear Line-Out* (190 ohms Output Impedance, expects at least a 10-K ohm load)
Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load)
Front Microphone/Headphone jack is re-task able to provide Microphone input, line-in or
Headphone output to support connecting two headphones to the front of the system. When
configured as a second front headphone output, both front headphone outputs are always
driven with the same signal.
Comentários a estes Manuais